BUSHES
BUSHES O.D. : 25mm to 150mm (Standard)
I.D. :12.5mm to 125mm (Standard)
Length : 100mm (Standard)
Made to order :
a) O.D. : 1100mm (Maximum)
    I.D. : 6mm (Minimum)
    Length : 100mm
b) Longer lengths upto 750mm for Bush
    OD upto 300mm with minimum wall
    thickness of 10mm.
Material : 100% PTFE and Filled PTFE.
Fillers: Glass/Carbon/Graphite/Bronze/
Bronze + MoS2
 
DIAPHRAGMS
FOR VALVES AND PUMPS
Size : 12 - 250mm NB Saunder Weir type Diaphragm Valve.
Stud : PIN Type/Screw Type upto 150mm.Screw type 200 - 250mm.
Padding : Neoprene Rubber Padded.
Made to order :
a) PTFE diaphragms for Pumps.
b) VITON®/SILICON/NEOPRENE/
    BUTYL/HYPALON Rubber Diaphragms for     Saunder weir type Valve.
Application:
To handle highly corrosive chemicals from 200ºC to 260ºC service temperature. For 7/8 Kgf/cm² line pressure. Also to handle sticky - abrasive fluids.
 DIAPHRAGMS
 
GASKETS FOR STATIC APPLICATION ENVELOPE / SOLID TYPE
GASKETS FOR STATIC APPLICATION ENVELOPE / SOLID TYPE Milled & Slit type with or without CAF inserts. Milled type gives proper fitting for insert resulting in flat face to the flange. But it will be expensive While SLIT type envelope do not give fullflat face to the flange but it is cheaper as compared to Milled type.
Size : 12mm onwards with std flap thickness of 0.5mm (Other on request). Also in elliptical shapes and large sizes.
PTFE Solid Gaskets : Available in all shapes and sizes up to 1100 OD Maximum. Large size and shapes by welding process upto 15mm thickness.
Applications : Used in chemical plants, Glass lined pipes, fittings & tanks etc for static sealing of highly corrosive fluids at high temperature.
 
 
UNIVERSAL ROPE GASKET
PTFE Universal Rope Gasket is soft unsintered material having very smooth surface finish and characterized by very low co-efficient of friction. This makes it very useful sealing material and used as gaskets on flanged connections of pipe, fittings, tanks & vessels and such other matting surfaces.
Size & shapes : 1.5mm - 29mm in Round/square sections in the length of 5 Mtr to 10 Mtr.
UNIVERSAL ROPE GASKET
 
MACHINED FINISH COMPONENTS
MACHINED FINISH COMPONENTS Valves seats, Roof packings, Seal cover, Plug valve sleeve, wedge rings, 'O' rings, Washers, Bearings, & Bushings, Insulators, Pipe joints, Guides, Beakers, Piston Rings, Rider rings etc for non-lubricated compressors, Balls etc.


Viton® are registered trademarks of DuPont Dow Elastomers.


TOP